Showing posts with label kids. Show all posts
Showing posts with label kids. Show all posts

Monday, October 6, 2014

Spider Webs

In honor of the gigantic spider that made a web by our mail box.
We got to watch it eat two crickets (because daddy kept feeding it crickets while we were watching).




SPIDER WEBS!  Also good for Halloween crafting!  We posted ours to our front door.


This is how you make it.

Punch holes around a paper plate.




Get some black string and a kids needle (or you can put tape around the end of the string to make it like a shoelace).

I taped the other end of the string to the back of the plate and then let them string em up how they wanted.
My son needed a little help (not with the threading, but he went from hole to hole all around the edge of the plate and didn't have any string across the middle).

This was the point where we started learning about directional words.

Next to.
Across from.
Around.
Straight.
Front. 
Back.

You can see how originally he just went around the edge of the plate.  Once we started talking about going across not next to, he got it!


She needed a little bit more help pulling her string all the way out because she is younger but with a little guidance they pretty much did this on their own.

Her needle came off her string.

The finished web.

Once your webs are finished tape the end of the string to the back of the plate with the other end.
Then we made spiders out of pipe cleaners.
I took two pipe cleaners for each spider and cut them in half.
Then we took the four pieces and twisted them around each other in the middle to make eight legs.


We practiced counting the legs

Then we just tangled the spider legs up in the web (no glue required).

Don't they look awesome!

Perfect for welcoming trick-or-treaters on Halloween.

Monday, August 18, 2014

Toddler Wrap Around Skirt - Tutorial

Another tutorial today of a toddler wrap around skirt. It has a rick-rack bottom hem and three buttons down the front
Step One: cut your fabric approximately 9 inches tall and 25 inches long.  I ended up piecing two together with the pieced seam in the back.  I used a brown/greenish corduroy (left over scraps from my son's TOOL BELT).  I did all of my stitching in light pink thread and had decorative button hole covers and buttons in light pink to go with.


Step Two:  Iron top and bottom a quarter inch down and then roll again and iron loose end under. Pin in place.
Top and bottom seams ironed and pinned. 1/4 plus a 1/4 turn to hide loose ends inside.
 Step Three: Turn your pinned skirt over and pin rickrack about a 1/4 from bottom of skirt.  You will sew this on which will attach it and also lock down your hemline at the same time.
Pinning the rickrack.
 Step Four: Sew the rickrack right down the center very slowly for precision sake!  This will hem your bottom and decorate at the same time.


Finished sewing my bottom hem.  See the stitches right down the middle.
 Step Five: Turn your skirt around and sew a 1/4 from top waistline.
 Step Six: Sew another line parallel to your quarter inch line for sturdiness sake and prettiness.
Waistline.


These were the buttons with their awesome holes I cut off of an old shirt that was getting worn out.

20 minutes of ripping and I had the holes off of the shirt fabric.
 Step Seven: Sew your button holes on where you want them.  If you don't have some decorative ones to put on you can just sew button holes directly in your skirt fabric according to your machine instructions.
Figuring out where I wanted them

All three button holes sewn on, ripped open and ready for buttons.
 Step Eight: Line up your skirt with enough room for a little one to fit inside and then mark where you want your buttons.
If your button holes are open you can mark right through to the other side for the buttons. 

marking my buttons
 Step Nine: Sew on your buttons according to your machine directions or by hand.
 Step 10: Revel in a 30 minute project that was easy peasy and cutie patootie on a sweet girl.

With a cute pink shirt


This was a twirl photobombed by a dog!

More twirling.
The only amendment I would make to this is that the back top might need darts if your little one has a skinny little waist.  We made this for a friend so we are going to leave it in hopes that it will fit her.  If not I know that her grandma can stick a few removable darts in it temporarily so it isn't too loose.  You want the top button on snugly and the two bottom buttons are mostly show, not for holding up sake.

Saturday, August 16, 2014

Kids Tool-Belt Tutorial

Another Tutorial today on how to make your own tool belt.

I used corduroy because it was a scrap piece that I had on hand but you could use any heavy duty material.


Dimensions for your belt are one piece approximately 6 in x 26 in.  My son's waist is only like 20 but you don't want it super tight, the first button I put at 21 in.  I put three buttons in at 21, 23 and 25 inches for some room to grow.

You need two pocket pieces at approximately 5 x 6 in. (as you can see in my picture mine are not quite 5 inches wide, again I was working with some scrap and used what I had but 5 would definitely allow enough room for a little hand.)

Two pieces which will be the hammer loops I made mine 2 x 5 in approximately.  The length was perfect but turning a piece of corduroy right side out was extremely difficult and time consuming.  I would suggest making your loop pieces 3 inches wide which would allow for easier turning.

 Step 1: Fold your loop pieces in half length wise and sew along open edge and one open side.
 Step 2: Fold down the top 1/4 in of your front and back pocket pieces and top stitch to hold it in place.
 Step 3: Fold your long belt piece in half length wise with right sides together.  Sew one open edge and along the long open top but do not sew other open end.  You will want to turn this right side out and need the edge open.
Belt piece with right edge and top of strap sewn

still inside out at this point.
 Step 4: Flip belt right side out through opening at one side and top stitch around entire edge 1/4 in.  I used a zigzag for some stability and looks. At the open end turn under 1/4 and top stitch that opening down.
belt piece top-stitched.

belt piece
 Step 5: On pocket with top sides matched up and right sides together sew around the two sides and bottom of pocket so you can turn it right side out.
This is the pocket with the opening to the left and the bottom on the right.
 Step 6: Turn your pocket right side out and pin the back of the top of the pocket to the tie where you want it.  I didn't put this pocket right in the center of the tie I put the left side of the pocket about 9 inches from the left side of the tie end.  Then top stitch the back only of the pocket to the tie piece.
Top stitch the top BACK ONLY of the pocket to the tie.
 Step 7: Once the back of the pocket is secured in place put front of the pocket back down and reinforce stitch the two sides through all layers of pocket and tie about an inch down.
I zigzaged my side reinforcements but that top stitching that you see is just on the top of the pocket it doesn't go all the way through.

After your back and sides are secure but your front is loose you should be able to put your hand in and it should be pretty sturdy.
 Step 8: Next put the loops on by securing them with zigzag stitches.  I secured mine from the inside of the loop so the stitching wasn't visible but it is tricky if using a machine.  You can always hand stitch these on.
pocket and loop secured

loop and pocket from the front

 Step 8: Add second loop in same fashion.
pocket and both loops from front

starting to look like a belt
 Step 9: Follow the instructions on your sewing machine to make a button hole.  Rip it open.
 Step 10: Sew on your buttons according to your machine's directions.  Or you can sew them by hand.  I chose to do three at 21", 23" and 25" for room to grow and if he wears it with bulkier clothes.
As you can see I needed to follow the directions in my manual as it has been awhile since I've sewn a button!

Starting to look like a belt and ready to be stuffed with tools!

Here it is the finished product with a classy picture in front of the door!

And a blurry one!


Just call me Matt the Builder, can we fix it, yes we can.

Checkin' out his cool belt

Classy wave!
If you use my tutorial and pattern to make a belt of your own please be sure to leave your link in the comments.  I'd love to see your tool belt creations!